Sig Mech SIG Sauer P320 MSAFE-T Toolkit V2

INTRODUCING THE SIG MECHANICS MSAFE-T V2. NOW MADE FROM ULTRA DURABLE S7 TOOL STEEL AND CAPABLE OF MODIFYING BOTH X-SERIES AND STANDARD P320 GRIP MODULES.

SIGMECH official UPDATED P320 Manual Safety Conversion Toolkit video HERE

The MSAFE-T toolkit contains all the necessary tools to convert ANY non-manual safety P320 FCU so it can then use a factory manual safety assembly available HERE

Each kit contains two sets of templates. The FCU template will locate the exact coordinates along the FCU where you need to cut in order to convert the FCU chassis. The plates also have a 1:1 exact cutout of the shape you need to trace out with your cutter to match the factory M17 and M18 FCU manual safety design. This allows for a factory manual safety to be installed and used while allowing owners the freedom to switch back-and-forth between manual and non-manual P320 versions at their convenience.

The second included set of templates is used on the factory grip module (both X-Series and standard grips). When installed, the templates, indicate where to cut the required notch into the polymer grip while providing an extremely durable protective guide for your cutting bit to trace. Once cut, the modification converts your non-manual safety grip module so it fits a factory manual safety FCU and assembly.

KIT INCLUDES:

FCU MODIFICATION TEMPLATES: 1x Front Plate | 1x Back Plate | 2x Screws | 2x Nuts | 2x Allen Keys.

GRIP MODIFICATION TEMPLATES: 1x Left Plate | 1x Right Plate | 2x Screws | 2x Nuts | 1x Allen Key.

CUTTING BITS: 1x Carbide Cutter Bit | 1x Tungsten Cutter Bit.

ATTENTION: This kit does not include factory parts and the following is needed to complete the conversion: 1x Manual Safety Parts Kit 8901023 | 1x Safety Lever Housing Pin 1301341-R